Pan Bar Controller

JJC TPR-U1 Pan Bar Controller is especially designed to work with SON. camera/ camcorder with a Multi/ LANC terminal and CAN. camcorder with a LANC terminal, adding a panhandle-based camera control to your setup. It fits most tripods with handle diameter within 0.4"-1.4".
  It enables you to control your camera/ camcorder by using a cable connected to the multi/ LANC port rather than using buttons on the camera/ camcorder. This can make operation much more convenient and flexible for you, enables you to focus on the shot you are trying to capture rather than the mechanics of the equipment. Designed with a detachable multi-function controller, you can detach the controller from the tripod to prevent camera shaking when shooting still images. Hold the tripod and press the PUSH RELEASE button to pull the controller out. Slowly slide the controller onto the pan bar for easy attaching. And the controller functions with power on/ off, video/ still image recording, zooming, slow zooming, locking function and displaying grid line*. The controller replaces SON. RM-1BP, RM-VPR1, RMT-VP1K remote commander.
  Silicone pads designed inside the handle clip are for closer clamping and protect tripod handle from scratching. Constructed from premium aluminum alloy, the pan bar is sturdy and provides years of reliable use. Rotate direction control and lock knob to position the pan bar at any 10-degree interval while avoiding slippage or accidental loosening. 
  Package contains one cable for SON. camera/ camcorder with Multi terminal, one cable for SON. camera/ camcorder and CAN. camcorder with LANC terminal, a storage pouch for easy storage and a lanyard for preventing loss when using the detachable controller alone. 
 All our products have undergone multiple inspections to assure their quality. It is worth your trust.

* Not all cameras/ camcorder supports shooting, bulb shooting, continuous shooting or grid line. Refer to the operating instructions of your camera/ camcorder for details.

Product Highlights
Works with SON. camera/ camcorder with a multi/ LANC terminal and CAN. camcorder with a LANC terminal.
Replaces SON. RM-1BP, RM-VPR1, RMT-VP1K remote commander.
Fits most tripods with handle diameter within 0.4"-1.4".
Adds a panhandle-based camera control to your setup, enables you to control your camera by using a cable connected to the multi/ LANC port rather than using buttons on the camera and makes operation more convenient and flexible.
Detachable multi-function controller for detaching from the tripod to prevent camera shaking when shooting still images.
Constructed from premium aluminum alloy, the pan bar is sturdy and provides years of reliable use.
Rotates and positions at any 10-degree interval while avoiding slippage or accidental loosening.
Additional features include power on/ off, video/ still image recording, zooming, slow zooming, locking function and displaying grid line.
Comes with one connecting Cable for Multi Terminal, one connecting Cable for LANC Terminal, a storage pouch and a lanyard.

Package Includes
Pan Bar Controller x1
Connecting Cable for Multi Terminal x1
Connecting Cable for LANC Terminal x1
Storage Pouch x1
Lanyard x1
Instruction Manual x1

Compatibility
Fits SON. camera/ camcorder with a Multi terminal, below are some of the models for reference:

SON. Cameras:
a7R V/ ZV-1/ A9/ A7/ A7II/ A7III/ A7IV/ A7R/ A7RII/ A7RIII/ A7RIV/ A7S/ A7SII/ A7SIII 
A6600/ A6500/ A6400/ A6300/ A6100/ A6000/ RX100 Mark VII/ VI/ VA/ IV/ III/ II / RX10 IV/ III

SON. Camcorders:
PXW-X70/ PXW-Z90V/ HXR-NX80 
FDR Series: AX30/ AX33/ AX40/ AX43/ X53/ AX55/ AX100/ AX100E/ AX700/ AXP33/ AXP35/ AXP55 
HDR Series: CX240/ CX405/ CX440/ CX455/ CX675/ CX900

Note: When being used with the above Mirrorless cameras, the Zooming function of the remote commander can only work with power zoom lens such like the SON. E PZ 16-50mm f/3.5-5.6 OSS Lens.

Fits most camcorders and cinema cameras that have a LANC terminal or 2.5mm Remote Terminal, below are some of the models for reference:

SON. Camcorders:
HXR-NX100/ HXR-NX200/ HXR-NX5R/ HXR-NX3/ HXR-NX70/ HXR-NX30/ HXR-MC2500
PXW-FS5/ PXW-FS7/ PXW-X160/ PXW-X180/ PXW-Z100/ PXW-Z150/ PXW-Z190/ PXW-Z280/ FDR-AX700

CAN. Cinema Cameras:
EOS C100/ EOS C100 Mark II/ EOS C200/ EOS C200B/ EOS C300/ EOS C300 Mark II
VIXIA HF S20/ HF S30/ HF G10/ HF G20/ HF G21/ HF G26/ HF G30/ HF G40/ HF G50/ HF G60
XA10/ XA11/ XA15/ XA20/ XA25/ XA30/ XA35/ XA40/ XA45/ XA50/ XA55
XF100/ XF105/ XF200/ XF205/ XF300/ XF305/ XF310/ XF315/ XF400/ XF405/ XF605/ XF705

Note: When used on these Canon cinema cameras, as there is no motorized zoom function on the camera/ lens combination, the zoom control on the remote will not work, please consider this point before your purchase.