中文
MOISTUREPROOF FILTER CASE
10 packs of desiccant silica gel；One sheet of moistureproof interleaving paper；Water resistant；6 pieces 1mm-thick sponge pads；O-ring gaskets of different sizes；The maximum filter thickness is up to 8mm
- Model: FLC-L
- Bar Code: 6950291559609
The JJC FLC Series Moistureproof Filter Case is made from quality PC materials. Each case includes 10 packs of desiccant silica gel, one sheet of moistureproof interleaving paper, 6 pieces 1mm-thick sponge pads and several o-ring gaskets of different sizes. The maximum filter thickness is up to 8mm. The moistureproof filter case has characteristics of anti-impact, moistureproof and water resistant, which can protect your high-end filter effectively.
FLC-S Includes:
1 Moistureproof Filter Case: 70mm × 78mm × 18mm
10 packs of desiccant silica gel
one sheet of moistureproof interleaving paper
6 pieces 1mm-thick sponge pads
7 pieces o-ring gaskets of 37mm, 40.5mm, 43mm, 46mm, 49mm, 52mm and 55mm
FLC-L Includes:
1 Moistureproof Filter Case: 100mm × 108mm × 18mm
10 packs of desiccant silica gel
one sheet of moistureproof interleaving paper
6 pieces 1mm-thick sponge pads
6 pieces o-ring gaskets of 58mm, 62mm, 67mm, 72mm, 77mm and 82mm (You can also put the 86mm filter into the case without the o-ring gasket. )
Use method
First, choose the proper number of the sponge pad, according to the thickness of your filter, and put them into the bottom of the case. Then put in the moistureproof interleaving paper. After that, putting the filter into the suitable o-ring gasket and put them into the case. Finally, you can adjust the number of the sponge pad on the basis of the degree of tightness. What's more, do not forget to put the desiccant silica gel into the inside lid (1 pack in FLC-S, 2 packs in FLC-L). The desiccant silica gel should be changed every month. If the desiccant silica gel is used up, you can choose our product JJC SGD-50 as a supplement.
Product Highlights
10 packs of desiccant silica gel
One sheet of moistureproof interleaving paper
Water resistant
6 pieces 1mm-thick sponge pads
O-ring gaskets of different sizes
The maximum filter thickness is up to 8mm
FLC-S Includes:
1 Moistureproof Filter Case: 70mm × 78mm × 18mm
10 packs of desiccant silica gel
one sheet of moistureproof interleaving paper
6 pieces 1mm-thick sponge pads
7 pieces o-ring gaskets of 37mm, 40.5mm, 43mm, 46mm, 49mm, 52mm and 55mm
FLC-L Includes:
1 Moistureproof Filter Case: 100mm × 108mm × 18mm
10 packs of desiccant silica gel
one sheet of moistureproof interleaving paper
6 pieces 1mm-thick sponge pads
6 pieces o-ring gaskets of 58mm, 62mm, 67mm, 72mm, 77mm and 82mm (You can also put the 86mm filter into the case without the o-ring gasket. )
Use method
First, choose the proper number of the sponge pad, according to the thickness of your filter, and put them into the bottom of the case. Then put in the moistureproof interleaving paper. After that, putting the filter into the suitable o-ring gasket and put them into the case. Finally, you can adjust the number of the sponge pad on the basis of the degree of tightness. What's more, do not forget to put the desiccant silica gel into the inside lid (1 pack in FLC-S, 2 packs in FLC-L). The desiccant silica gel should be changed every month. If the desiccant silica gel is used up, you can choose our product JJC SGD-50 as a supplement.
Product Highlights
10 packs of desiccant silica gel
One sheet of moistureproof interleaving paper
Water resistant
6 pieces 1mm-thick sponge pads
O-ring gaskets of different sizes
The maximum filter thickness is up to 8mm
Related Products