Wireless Remote Controller replacing Nikon MC-DC2

JJC ES-628 series Wireless Remote Controller is designed for CANON, NIKON, SONY, PENTAX, SAMSUNG, OLYMPUS and other brands of cameras with a remote shutter socket. The remote controller allows you to control the camera from afar when shooting, so it also prevents camera shaking. The unit includes three parts: transmitter, receiver and a connecting cable. It powers easily. The receiver is powered by two AAA lithium batteries and the transmitter is powered by a piece of CR2032 battery. The ES-628 controller can trigger the camera shutter at five modes: single shot, unlimited continuous shots, bulb shot, 3 continuous shots and 5 seconds delay shot. What's more, ES-628 transmitter is able to fire multiple receivers at the same time, so you can control more than one camera to take photos simultaneously. In addition, the receiver itself with the connecting cable can be used as a wired remote switch.The transmitter and receiver can be paired easily by any one of 16,000,000 channels through smart code. This system works at 2.4Ghz frequency allowing the transmitter to trigger the receiver from 100 meters away. The receiver has a universal 1/4"-20 tripod mount socket on the bottom, so you can even mount it onto a tripod. All these features make it your best partner when you take photos. 

ES-628 transmitter x 1

ES-628 receiver x 1

AAA battery x 2

CR2032 battery x 1

Connecting cord x 1

This instruction manual x 1

Warranty card x 1

Compatible with different brands of cameras by replacing the JJC connecting cable 

The transmitter and receiver can be paired easily by any one of 16,000,000 channels through smart code

Works at a frequency of 2.4Ghz

Allows the transmitter to trigger the receiver from 100 meters away

Can trigger the camera shutter at five modes: single shot, unlimited continuous shots, bulb shot, 3 continuous shots and 5 seconds delay shot

The receiver can be mounted onto a tripod

One transmitter is able to fire multiple receivers at the same time

The receiver itself with the connecting cable can be used as a wired remote switch

Prevent camera shaking

Useful when shooting subjects that are difficult to get close to

Replacing
ES-628N3 replacing Nikon MC-DC2

Compatible with